CPAP C-444 Specifikace stáhnout pdf (Strana 10)

- 7 -

CONNECTOR TIPS

 If the DC Power Cord will not directly and tightly fit in the CPAP

machine you will need to use one of the connector tips provided to

complete the connection between the Battery Pack and the machine.

 Locate the DC input port on the CPAP machine.

 Try to insert a connector tip to the DC input port on the CPAP

machine and then gently try to plug the connector tip to the DC

Power Cord of the Battery Pack.

 Test all of the connector tips. Create 2 different piles of tips. The first

pile will include all the connecter tips that do not fit tightly into the

DC input port of your CPAP machine. The second pile will include

those connector tips that are potential matches because they

physically fit into the DC input port of your CPAP machine.

 Connect the DC output cable to the Battery Pack. Carefully test

each tip from the handful of potential matches that were set aside

by plugging each tip into your CPAP machine and then try

turning it on to see if the machine begins running.

 Try all of the connector tips. Even if you find that one works,

there may be another connector tip that makes a better connection.

You want to avoid using a loose tip if there is a better match.

 Once you have found the best connector tip, store it in a separate

place away from the other tips for easy retrieval.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Žádné komentáře

CPAP C-444 Specifikace Strana 10